FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
Back to site

Mustang MD-250 Chassis Dynamometer Dyno

 
Post new topic   Reply to topic    EFI University Forum Index -> EFI Classifieds
View previous topic :: View next topic  
Author Message
DynocomInc



Joined: 20 Nov 2009
Posts: 16777215
Location: Fort Worth, Texas USA

PostPosted: Wed Nov 23, 2016 3:44 pm    Post subject: Mustang MD-250 Chassis Dynamometer Dyno Reply with quote

Mustang MD 250 Chassis Dynamometer - fully refurbished with airbag lift kit, extra massive inertia disc and Quantum Data Acquisition System. More on the MD 250:

MD-250 Series
Max Horsepower:
1,300 hp
Max Absorption:
900 hp
Loading Device:
Air-cooled eddy current power absorber (model MDK-250)
Torque Measurement Device:
Strain Gauge Type Dynamic Load Cell. Provides closed loop control signal for dynamic vehicle loading.
Inertia:
Approximately 2,000 lbs. base mechanical inertia
Max Speed:
175 mph
Controls:
Closed Loop Digital Controller with Windows based PowerDyne Software. Includes Patented Virtual Road Simulation Technology.
Rolls/Wheelbase:
Precision machined and dynamically balanced
Knurled finish for superior tire traction
Belted for bi-directional capability
10.7” (272mm) diameter balanced rolls
40” (1,016mm) face length
28” (711mm) inner track width
108” (2,743mm) outer track width
19.6” (498mm) roll spacing
Roll Lock:
Industrial brake pad in contact with O.D. of roll
Roll Decelerator:
Allows vehicle deceleration without use of vehicle brakes. Eddy Current PAU used to decelerate rollers.
Air Requirements:
100 PSI, dry, regulated, oil free
Power Requirements:
115 VAC, single phase, 60 Hz, 15 Amps (computer)
230 VAC, single phase, 60 Hz, 40 Amps (dynamometer)
Axle Weight:
12,000 lbs (2,727 kg) maximum
Shipping Weight:
4,500 lbs. (dynamometer weight only)

Comes with 30 Day warranty. Financing available in USA & Canada - questions call 817-284-8844 or text 817-965-6559 email sales@dynocom.net  http://www.ebay.com/itm/-/282266634682?
Back to top
View user's profile Send private message Visit poster's website
DesertWagon



Joined: 02 Nov 2016
Posts: 10

PostPosted: Wed Nov 23, 2016 5:45 pm    Post subject: Reply with quote

Are you upgrading?
Back to top
View user's profile Send private message
GrannySShifting



Joined: 02 Jun 2017
Posts: 3

PostPosted: Mon Jun 05, 2017 10:11 am    Post subject: Reply with quote

sold?
Back to top
View user's profile Send private message Send e-mail
DynocomInc



Joined: 20 Nov 2009
Posts: 16777215
Location: Fort Worth, Texas USA

PostPosted: Mon Jun 05, 2017 11:48 am    Post subject: MD 250 Reply with quote

GrannySShifting wrote:
sold?


Yes sold
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    EFI University Forum Index -> EFI Classifieds All times are GMT - 7 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group

©2007 EFI University
Website designed and maintained by 3LizardsMedia.com