FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
Back to site

Pectel MQ12
Goto page Previous  1, 2, 3  Next
 
Post new topic   Reply to topic    EFI University Forum Index -> EFI Classifieds
View previous topic :: View next topic  
Author Message
quadcam



Joined: 28 Dec 2004
Posts: 58
Location: australia

PostPosted: Fri Aug 16, 2013 8:20 pm    Post subject: Re: Pactel Processor Reply with quote

Pantera EFI wrote:
Hi Peter, remember the $50.00 you owe my ?

Your chance to "win" it back would be to state the internal CPU model in your MQ-12.
No Google, no Pactel site, just off the top of your head.

Lance


I'll have a guess without looking anything up.

MPC565
Back to top
View user's profile Send private message
Buzzard



Joined: 14 Dec 2004
Posts: 221

PostPosted: Sat Aug 17, 2013 7:42 am    Post subject: Re: Pactel Processor Reply with quote

quadcam wrote:
Pantera EFI wrote:
Hi Peter, remember the $50.00 you owe my ?

Your chance to "win" it back would be to state the internal CPU model in your MQ-12.
No Google, no Pactel site, just off the top of your head.

Lance


I'll have a guess without looking anything up.

MPC565


Quady, any thoughts on the fuel table in milliseconds? I thought that went out with the Microtech?
Back to top
View user's profile Send private message
Pantera EFI



Joined: 12 Feb 2005
Posts: 1718
Location: So. California

PostPosted: Sat Aug 17, 2013 9:56 am    Post subject: Pactel Dealer Sales Requirements Reply with quote

Yes, you are correct the MPC565, a good processor though a little slow for high speed tooth decoding.
The "Co-Precessor" is the MPC5200 used for high speed I/O including data logging.
Then there is their FPGA that they state is used for "Angle Based Processing".

Thus a Degree Based system using THREE processors connecting to each other at high speed.

The Cosworth info ALSO states a requirement for those allowed the sell these EMS, attend a class at Cosworth in Hawthorne, CA. USA.

I would like to call my friend Nigel at Cosworth, Hawthorne to be sure of my guess.

Lance, BTW I have used the PI system on an OFFY powered Indy Car.
Back to top
View user's profile Send private message Send e-mail Visit poster's website
riceracing



Joined: 27 Apr 2013
Posts: 288

PostPosted: Tue Aug 20, 2013 3:37 pm    Post subject: Reply with quote

Customer taking his time to pay so others who have expressed interest e-mail me or pm and first to show ca$h will get it.

Thanks.
Back to top
View user's profile Send private message
riceracing



Joined: 27 Apr 2013
Posts: 288

PostPosted: Mon Sep 02, 2013 4:14 am    Post subject: Reply with quote

Those who have pm'd and emailed will have it on offer for a shorter time as Its going on another customer project if ca$h is not presented soon..... last chance.
Back to top
View user's profile Send private message
riceracing



Joined: 27 Apr 2013
Posts: 288

PostPosted: Thu Sep 12, 2013 1:07 am    Post subject: Reply with quote

Updated description on first page, few people who sent pm I have replied, first to respond gets this the best Pectel available for a faction of its true cost Wink
Back to top
View user's profile Send private message
TwinTurboM3



Joined: 21 Mar 2008
Posts: 535

PostPosted: Thu Sep 12, 2013 3:42 pm    Post subject: Reply with quote

Peter,

MQ12 is like a heritage for you, cannot get rid of it Wink
_________________
XM3 all wheel drive M3 twin 6266

0-60 mph 1,8 sec @ low boost
Back to top
View user's profile Send private message
riceracing



Joined: 27 Apr 2013
Posts: 288

PostPosted: Thu Sep 12, 2013 5:37 pm    Post subject: Reply with quote

TwinTurboM3 wrote:
Peter,

MQ12 is like a heritage for you, cannot get rid of it Wink


You may mis out mert, I have a couple of people contact me today about it. Wink
Back to top
View user's profile Send private message
TwinTurboM3



Joined: 21 Mar 2008
Posts: 535

PostPosted: Fri Sep 13, 2013 8:43 am    Post subject: Reply with quote

riceracing wrote:
TwinTurboM3 wrote:
Peter,

MQ12 is like a heritage for you, cannot get rid of it Wink


You may mis out mert, I have a couple of people contact me today about it. Wink


glws
_________________
XM3 all wheel drive M3 twin 6266

0-60 mph 1,8 sec @ low boost
Back to top
View user's profile Send private message
riceracing



Joined: 27 Apr 2013
Posts: 288

PostPosted: Mon Sep 16, 2013 2:21 pm    Post subject: Reply with quote

Have a Pectel DB-1 Card logger, which increase logging band width and logging capacity to 2 Gigabytes !!!! will include 2 cards as well.

This set up means no BS cable to car during pit stop, just rip out card and put in new one Wink very quick very fast, as used at Le-mans in top cars.

This is the ULTIMATE ECU Wink
Back to top
View user's profile Send private message
riceracing



Joined: 27 Apr 2013
Posts: 288

PostPosted: Wed Sep 18, 2013 3:22 pm    Post subject: Reply with quote

After a barrage of pm's and 'stupid offer' I am posting this up here.
NO OFFERS!

The price is listed on the first post, not once cent under, simple.
IF you want to talk look up rice racing, you will see my email then contact through that please, if you are serious I will give you my time and facilitate a conventional transaction. NO TERMS other than YOU PAY, I SEND IT! SIMPLE!

This ECU data package is a bargain to those who have any idea, for those that do not I AM NOT INTERESTED IN TALKING ENDLESSLY WITH YOU! I strongly suggest to people like that you buy a hobby unit and stay at that level which makes you comfortable ;)

PECTEL MQ12 + ICD + DB1-RSHE + software + connectors + others!

$15,000US shipped, thanks.


Last edited by riceracing on Thu Feb 06, 2014 3:40 pm; edited 3 times in total
Back to top
View user's profile Send private message
TwinTurboM3



Joined: 21 Mar 2008
Posts: 535

PostPosted: Fri Sep 20, 2013 12:06 pm    Post subject: Reply with quote

good luck with the sale.

this is a high-end ecu, hope it will find a new home Smile
_________________
XM3 all wheel drive M3 twin 6266

0-60 mph 1,8 sec @ low boost
Back to top
View user's profile Send private message
riceracing



Joined: 27 Apr 2013
Posts: 288

PostPosted: Fri Sep 20, 2013 2:49 pm    Post subject: Reply with quote

E-Mails replied, thanks
Back to top
View user's profile Send private message
riceracing



Joined: 27 Apr 2013
Posts: 288

PostPosted: Fri Sep 27, 2013 12:33 am    Post subject: Reply with quote

NLFS as is going onto a project with this ICD dash and DB-1 RSHE logger ! > http://www.youtube.com/watch?v=Gv8Szo_6j70&feature=c4-overview&list=UUuU-QZDpFDHs8OyLLK1k7uQ

All of the parts :)

Back to top
View user's profile Send private message
riceracing



Joined: 27 Apr 2013
Posts: 288

PostPosted: Wed Oct 02, 2013 10:10 pm    Post subject: Reply with quote

TwinTurboM3 wrote:
good luck with the sale.

this is a high-end ecu, hope it will find a new home Smile


Thanks mate,

No luck needed on my end though, it's got a home and use eitherway, LUCK will be with anyone who has the money to match their desire to get on board with the best ECU data system available today ........... if they want IN then time is running out Very Happy

I put up a picture of all the parts inc showing the software etc. Stupidly great units! people only mostly see these on TV or the internet LOL not in real life unless they are part of a team at LeMans etc ;)

Never seen one for sale anywhere before and you are likely to never see one for sale again! rare opportunity to buy the best at a HUGE DISCOUNT !

I did up a workbook with some worksheets showing off some features of the Professional Pi Toolbox software features, this is a F1 car at Hokenhiem circuit.







Some better screen set ups and comparisons to multiple laps & different drivers.
Nice to have good electronics package :)





Back to top
View user's profile Send private message
klot



Joined: 05 Nov 2013
Posts: 1

PostPosted: Tue Nov 05, 2013 10:40 pm    Post subject: CalTool 3.5 Reply with quote

Hello,
I saw an interesting screenshot of caltool 3.5. I am using 3.4 with sq6m and would like to upgrade to 3.5, do you know whether it is possible and how?

P.S. Any chance for you selling the Professional Toolbox?
Thank you!
Back to top
View user's profile Send private message
riceracing



Joined: 27 Apr 2013
Posts: 288

PostPosted: Wed Nov 06, 2013 12:00 am    Post subject: Re: CalTool 3.5 Reply with quote

klot wrote:
Hello,
I saw an interesting screenshot of caltool 3.5. I am using 3.4 with sq6m and would like to upgrade to 3.5, do you know whether it is possible and how?

P.S. Any chance for you selling the Professional Toolbox?
Thank you!


I have all versions of Caltool (3.4 & 3.5 even a beta release of a more advanced 3.6 (Build 358), there is no physical 'apperance' difference so I stuck with using the 3.4 version myself, I'd have to re read the release notes on the versions but sans that they are the same with what I do on them.

If you email Robert Jarvis @ Cosworth or Lawrence Riley (these are the only two people I have ever dealt with there!) then I am sure they can help you out by organizing a drop box link so you can obtain the software.

The Professional Toolbox is licenced to me < I doubt I would sell it as I use it for work (education) and my own personal vehicle. It is great, very powerful.
Back to top
View user's profile Send private message
riceracing



Joined: 27 Apr 2013
Posts: 288

PostPosted: Wed Nov 06, 2013 3:36 am    Post subject: Re: CalTool 3.5 Reply with quote

klot wrote:
Hello,
I saw an interesting screenshot of caltool 3.5. I am using 3.4 with sq6m and would like to upgrade to 3.5, do you know whether it is possible and how?

P.S. Any chance for you selling the Professional Toolbox?
Thank you!


This is some more screen shots of the Toolbox Professional off my new dedicated bespoke laptop just for this work.

Excellent :)

Uploaded with ImageShack.com
Uploaded with ImageShack.com
Uploaded with ImageShack.com
Uploaded with ImageShack.com
Uploaded with ImageShack.com
Uploaded with ImageShack.com
Uploaded with ImageShack.com
Uploaded with ImageShack.com
Back to top
View user's profile Send private message
riceracing



Joined: 27 Apr 2013
Posts: 288

PostPosted: Thu Feb 06, 2014 3:45 pm    Post subject: Reply with quote

PM's replied, I have another of these, same combination listed here so for serious inquiries can send this set up right now !
Back to top
View user's profile Send private message
riceracing



Joined: 27 Apr 2013
Posts: 288

PostPosted: Thu Mar 13, 2014 7:56 pm    Post subject: Reply with quote

New parts listed.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    EFI University Forum Index -> EFI Classifieds All times are GMT - 7 Hours
Goto page Previous  1, 2, 3  Next
Page 2 of 3

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group

©2007 EFI University
Website designed and maintained by 3LizardsMedia.com