latest Redline ECU software?

noslzzp · Joined: 29 Jan 2017 Posts: 3

Greetings,

Happy to have found this place as it's given me hope to get some updates to my ECU.

So we are running a Redline 882 ECU (not sure what sub-model it is) but the bottom of the unit has the following hand etched:

[code]REV 1-01-28 WP 2-4-12[/code]

Some info on our project:

- The ECU is controlling a Subaru EZ30R motor (6 cylinder with variable cams).
- It has a fixed tooth trigger wheel from Outfront Motorsports.
- The motor runs but is not tuned.

I can't get into contact with any one over at Redline Weber nor my original builder. The software on Redline's site is woefully old and we're looking the latest software to run on our Windows 7 laptop.

Will the Pantera software work with this unit? If so, how can w get a copy? Any other options?

THANKS!

Pantera EFI · Joined: 12 Feb 2005 Posts: 1718 Location: So. California

Hi, yes I will help.

I would like to call, would you PM your phone ?

Lance

noslzzp · Joined: 29 Jan 2017 Posts: 3

DM sent. Thank you so much!

noslzzp · Joined: 29 Jan 2017 Posts: 3

Lance, I sent a DM and also left two messages. Things ok on your end?

Pantera EFI · Joined: 12 Feb 2005 Posts: 1718 Location: So. California

Yes, just OK as my wife is much better. (Chemical "KEMO") now completed.

Your USPS has shipped with the software.

Lance

SteveF · Joined: 17 Apr 2017 Posts: 12

I am also in need of the latest software and firmware update for our ECU if anyone can help?

Thanks in advance...

Pantera EFI · Joined: 12 Feb 2005 Posts: 1718 Location: So. California

Hi Steve, yes I have the Software/Firmware.

Could you ship the ECU to my shop ?

DO you have the Data Cable ?
(FTDI USB/RS-232)

Lance

SteveF · Joined: 17 Apr 2017 Posts: 12

Hi Lance,

Thanks for the reply, think i emailed you directly a couple of weeks ago... We are in the UK... Can you send the install files for us to do here? We do have the data cable.

DeweyK · Joined: 18 Oct 2018 Posts: 1

Sorry to dig up an old post, but I just ran across this website and I am in the same situation as the original poster. I have purchased a vehicle that was set up using Redline 882 ECU and need some help. (car is running, but needs tuning. Engine is 3.0L Subaru from 2006 Tribeca)

The prior owner/seller furnished the software disc but it was cracked and won't load. I have tried unsuccessfully to connect with Redline and no one else will touch this ECU in my area. I am taking a shot here in hopes someone can offer some direction or insight on how I can access the tune in this car. Thanks!

Pantera EFI · Joined: 12 Feb 2005 Posts: 1718 Location: So. California

Hi Dewey, the best way is to call the shop, 949-250-1797

Lance