FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
Back to site

MoTeC v3.4

 
Post new topic   Reply to topic    EFI University Forum Index -> MoTeC
View previous topic :: View next topic  
Author Message
al3bqari007



Joined: 01 Jun 2015
Posts: 2

PostPosted: Mon Jun 01, 2015 9:46 am    Post subject: MoTeC v3.4 Reply with quote

hi,


i have motec m600 with v3.4.

i want to program the ecu but i dont have the software..

if any one have the software please send it to my mail

al3bqariee@gmail.com



thanx to all
Back to top
View user's profile Send private message
David Ferguson



Joined: 21 Aug 2006
Posts: 59
Location: Paso Robles, CA

PostPosted: Mon Jun 01, 2015 5:19 pm    Post subject: Reply with quote

Is there a reason you don't just update to 3.5 and use the latest software available from:

http://www.motec.com.au/software/latestreleases/

MoTeC doesn't post the old 3.4 versions (they do post the older 3.5 versions) because there is no reason to use that with 3.5 available.
_________________
------
ferg@veracitydata.com
Veracity Racing Data
http://veracitydata.com
Back to top
View user's profile Send private message Send e-mail Visit poster's website AIM Address
stevieturbo



Joined: 29 Aug 2006
Posts: 1235
Location: Norn Iron

PostPosted: Tue Jun 02, 2015 10:40 am    Post subject: Reply with quote

David Ferguson wrote:
Is there a reason you don't just update to 3.5 and use the latest software available from:

http://www.motec.com.au/software/latestreleases/

MoTeC doesn't post the old 3.4 versions (they do post the older 3.5 versions) because there is no reason to use that with 3.5 available.


Most Motec software is freely available to download on the website above.

3.4 seems to be popular because I think there are a few "glitches" in it.

One being if the ecu is password locked, changing to 3.4 seems to make the ecu usable again.
But going to other versions has it locked again.

I havent needed this myself, but was told by others.

And whilst it's been a few years since I used it, I'm nearly sure after flashing the firmware, the logging/wideband was enabled for the 9hour period as with a brand new ecu.
I only noticed that after it had expired in my case
_________________
got blown

9.85 @ 144.75mph
202mph standing mile
http://www.youtube.com/watch?v=XgWRCDtiTQ0
Back to top
View user's profile Send private message Visit poster's website
David Ferguson



Joined: 21 Aug 2006
Posts: 59
Location: Paso Robles, CA

PostPosted: Tue Jun 02, 2015 1:28 pm    Post subject: Reply with quote

Now I understand -- thanks for the clues...
_________________
------
ferg@veracitydata.com
Veracity Racing Data
http://veracitydata.com
Back to top
View user's profile Send private message Send e-mail Visit poster's website AIM Address
Display posts from previous:   
Post new topic   Reply to topic    EFI University Forum Index -> MoTeC All times are GMT - 7 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group

©2007 EFI University
Website designed and maintained by 3LizardsMedia.com