FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
Back to site

Using M400 on a V-8 (injectors only)

 
Post new topic   Reply to topic    EFI University Forum Index -> MoTeC
View previous topic :: View next topic  
Author Message
Greenlight



Joined: 25 Aug 2006
Posts: 15

PostPosted: Sun May 03, 2015 5:22 pm    Post subject: Using M400 on a V-8 (injectors only) Reply with quote

Can I use an M400 to fire 8 injectors (1 every 90 degrees), using the secondary injectors as the additional 4 injectors?

It's a SBC V-8, firing order 1-8-4-3-6-5-7-2.

Can I offset fire the secondary injectors by 90 degrees?

I will use a stand alone ignition system (MSD 7AL3).

I will have a camshaft position sensor and an MSD crank trigger wheel.
Back to top
View user's profile Send private message
Adam



Joined: 02 Dec 2011
Posts: 57

PostPosted: Sun May 03, 2015 9:15 pm    Post subject: Reply with quote

The M400 only has 4 injector drivers so you will have to wire them in pairs and fire 2 at a time.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    EFI University Forum Index -> MoTeC All times are GMT - 7 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group

©2007 EFI University
Website designed and maintained by 3LizardsMedia.com