Joined: 25 May 2008
Location: Cairns, Australia
|Posted: Sat Mar 24, 2012 12:35 pm Post subject: WOLF V 500 comms issue
has anybody used WOLF V500 ecu software with Windows 7 and serial to USB adaptor.
I have a customers car in the workshop at present and cant connect to the ECU.
I get an error reporting no communications, power loss or words to that effect.
I am using an ATEN Serial to USB adaptor.
A friend can connect with his windows 7 laptop when using a serial lead only.
If he tries his ATEN adaptor he gets the same error message.
Non of my laptops have a serial port and i need to tune this car on the dyno.