| View previous topic :: View next topic |
| Author |
Message |
Brinkley
Joined: 23 Aug 2008
Posts: 2
|
 Posted: Sat Aug 23, 2008 3:31 pm Post subject: Setup help w/ SDL, 5 htz GPS, and start/finish.... |
 |
|
| I have an SDL hooked to a 5 htz GPS antenna. My goal is to have the running lap time displayed on the dash while driving. The dash configuration is set up and the 0.00.00 is displayed however will not start timing a lap. When I enter the latitude / longitude coordinates for the start finish line in "motec sport dash manager" its as easy as pie. However, when I pass by the set coordinates (Start/Finish) the dash display drops all info and the error code DIVO OXO276AE is displayed. Hitting the scroll switch does not help. The only fix is to shut down the ECU (M800) and Dash and start over. When I do that, the code clears. I'm more interested in learning how to properly load the coordinates and set dash manager so that lap time will start timing when I drive past S/F. |
|
| Back to top |
|
 |
Brinkley
Joined: 23 Aug 2008
Posts: 2
|
| Posted: Sat Aug 23, 2008 7:30 pm Post subject: Okay Okay I know it's Sat. night! |
|
|
| If anyone needs more detail to be able to help diagnose my problem in setting up the data acquisition, just ask a question. I can provide as much detail as possible, I've been working on this issue for three days straight. |
|
| Back to top |
|
|
Syclone383
Joined: 03 Dec 2005
Posts: 10
Location: Arab, AL
|
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
