| View previous topic :: View next topic |
| Author |
Message |
unit18
Joined: 11 Jun 2008
Posts: 167
|
 Posted: Wed Feb 22, 2012 11:37 am Post subject: Dyno Dynamics owners..... Need some help |
 |
|
When you power up your dyno ( i.e first thing in the morning? ) does the brake automatically turn on for 25-30 seconds?
If so, does this affect the operation of your brake when using the dyno?
Also can owners of a 4wd dos dyno open the front and rear covers and look in the pit boxes and tell me if any of the LED's are lit on the board? This would only take 10 minutes to do and would be a massive help to me. |
|
| Back to top |
|
 |
10sec_rx7
Joined: 27 Feb 2005
Posts: 379
Location: Sydney Australia
|
| Posted: Wed Feb 22, 2012 5:32 pm Post subject: |
|
|
| no my digital 450ds does not power up the brake at all when turning it on... |
|
| Back to top |
|
|
awddynotodd
Joined: 21 Oct 2006
Posts: 249
Location: Sydney, Australia
|
| Posted: Wed Feb 22, 2012 7:34 pm Post subject: Re: Dyno Dynamics owners..... Need some help |
|
|
| unit18 wrote: | When you power up your dyno ( i.e first thing in the morning? ) does the brake automatically turn on for 25-30 seconds?
If so, does this affect the operation of your brake when using the dyno?
Also can owners of a 4wd dos dyno open the front and rear covers and look in the pit boxes and tell me if any of the LED's are lit on the board? This would only take 10 minutes to do and would be a massive help to me. |
Do the retarders only "hum" when the PC is booting up? Does the humming stop when you open the dyno software? |
|
| Back to top |
|
|
pdyno
Joined: 10 Jul 2011
Posts: 2
Location: Maine
|
| Posted: Wed Feb 22, 2012 9:53 pm Post subject: |
|
|
| 10sec_rx7 wrote: | | no my digital 450ds does not power up the brake at all when turning it on... |
I also have a 450DS and mine is quiet while booting up. |
|
| Back to top |
|
|
unit18
Joined: 11 Jun 2008
Posts: 167
|
| Posted: Thu Feb 23, 2012 2:49 am Post subject: Re: Dyno Dynamics owners..... Need some help |
|
|
| awddynotodd wrote: | | unit18 wrote: | When you power up your dyno ( i.e first thing in the morning? ) does the brake automatically turn on for 25-30 seconds?
If so, does this affect the operation of your brake when using the dyno?
Also can owners of a 4wd dos dyno open the front and rear covers and look in the pit boxes and tell me if any of the LED's are lit on the board? This would only take 10 minutes to do and would be a massive help to me. |
Do the retarders only "hum" when the PC is booting up? Does the humming stop when you open the dyno software? |
Yes, they hum for 30 seconds, this is not affected if the pc is booting up or not. My old 2wd dyno did it occasionally as well. |
|
| Back to top |
|
|
awddynotodd
Joined: 21 Oct 2006
Posts: 249
Location: Sydney, Australia
|
| Posted: Thu Feb 23, 2012 4:08 am Post subject: Re: Dyno Dynamics owners..... Need some help |
|
|
| unit18 wrote: | | awddynotodd wrote: | | unit18 wrote: | When you power up your dyno ( i.e first thing in the morning? ) does the brake automatically turn on for 25-30 seconds?
If so, does this affect the operation of your brake when using the dyno?
Also can owners of a 4wd dos dyno open the front and rear covers and look in the pit boxes and tell me if any of the LED's are lit on the board? This would only take 10 minutes to do and would be a massive help to me. |
Do the retarders only "hum" when the PC is booting up? Does the humming stop when you open the dyno software? |
Yes, they hum for 30 seconds, this is not affected if the pc is booting up or not. My old 2wd dyno did it occasionally as well. |
Is it a 30 second time out for the Brake when you drive a car off normally? |
|
| Back to top |
|
|
project_skyline
Joined: 06 Apr 2008
Posts: 42
Location: Western Slope, Colorado
|
| Posted: Thu Feb 23, 2012 12:50 pm Post subject: |
|
|
Is your button sticking at all?
_________________
Owner/Tuner of Elevated Tuning
Driving an Evo 8 when its running. |
|
| Back to top |
|
|
unit18
Joined: 11 Jun 2008
Posts: 167
|
| Posted: Thu Feb 23, 2012 1:04 pm Post subject: Re: Dyno Dynamics owners..... Need some help |
|
|
| awddynotodd wrote: | | unit18 wrote: | | awddynotodd wrote: | | unit18 wrote: | When you power up your dyno ( i.e first thing in the morning? ) does the brake automatically turn on for 25-30 seconds?
If so, does this affect the operation of your brake when using the dyno?
Also can owners of a 4wd dos dyno open the front and rear covers and look in the pit boxes and tell me if any of the LED's are lit on the board? This would only take 10 minutes to do and would be a massive help to me. |
Do the retarders only "hum" when the PC is booting up? Does the humming stop when you open the dyno software? |
Yes, they hum for 30 seconds, this is not affected if the pc is booting up or not. My old 2wd dyno did it occasionally as well. |
Is it a 30 second time out for the Brake when you drive a car off normally? |
Yes, seems to stay on for a similar amount of time as when you press the brake button. My brake also applies itself as soon as the wheels stop turning on a car.
Any ideas Todd? |
|
| Back to top |
|
|
10sec_rx7
Joined: 27 Feb 2005
Posts: 379
Location: Sydney Australia
|
| Posted: Thu Feb 23, 2012 2:41 pm Post subject: |
|
|
| yep its fucked, Get DD to fix it, shouldnt do that |
|
| Back to top |
|
|
boca juniors
Joined: 21 Nov 2003
Posts: 126
Location: NOLA
|
| Posted: Fri Feb 24, 2012 6:50 am Post subject: |
|
|
| 10sec_rx7 wrote: | | no my digital 450ds does not power up the brake at all when turning it on... |
same here
_________________
EFI101 Graduate
AEM EMS Factory Certified
Corr Performance Tuning |
|
| Back to top |
|
|
henkgo
Joined: 18 Aug 2008
Posts: 46
|
| Posted: Fri Feb 24, 2012 1:41 pm Post subject: |
|
|
| boca juniors wrote: | | 10sec_rx7 wrote: | | no my digital 450ds does not power up the brake at all when turning it on... |
same here |
+1
_________________
www.proimport.nl
R33 GT-R V-spec Nissan Skyline
HALTECH Platinum Pro
Winner Dutch Time Attack Assen 2011 & Zandvoort 2011
Super Pro Street Division
EFI ACP certification
Dyno Dynamics AWD 450DS |
|
| Back to top |
|
|
PanteraTurbo
Joined: 28 Jul 2007
Posts: 128
Location: Victoria, BC
|
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
