| View previous topic :: View next topic |
| Author |
Message |
TurboNova
Joined: 08 Dec 2004
Posts: 1087
Location: Lake Havasu City, AZ
|
 Posted: Sun Dec 12, 2010 5:02 pm Post subject: Poll what injector are you using with XFI? |
 |
|
In the new XFI software there is a new table called injector opening time vs battery voltage. I am working on a folder for the new software that will have a listing for most of the common injector sizes and their calibrations. That way you can just choose your injector and paste the values into the table. I have about 40 of them now. So I need to know what brand of injector, size of injector and the ohm reading across the two pins if possible. Part number would be good too.
Thanks.
_________________
Brian Macy
EFI University Instructor
Horsepower Connection
www.horsepowerconnection.com |
|
| Back to top |
|
 |
Fuelie Nova
Joined: 05 Feb 2005
Posts: 75
|
| Posted: Tue Dec 14, 2010 1:23 pm Post subject: |
|
|
Great idea! I am running Ford Motorsport 36 lb redtops. I will get a coil reading when I get home tonight.
Tom |
|
| Back to top |
|
|
TurboNova
Joined: 08 Dec 2004
Posts: 1087
Location: Lake Havasu City, AZ
|
| Posted: Tue Dec 14, 2010 2:40 pm Post subject: |
|
|
I already have those done Tom. Thanks though.
_________________
Brian Macy
EFI University Instructor
Horsepower Connection
www.horsepowerconnection.com |
|
| Back to top |
|
|
Turbo Loyd
Joined: 06 Oct 2010
Posts: 1
|
| Posted: Sun Dec 19, 2010 8:57 am Post subject: Fuel Injectors used |
|
|
Hi Brian
The E-85 fueled car uses Seimens 83 Lb/Hr Low Z fuel injectors
Coil Resistance: 2.35 Ohms / Low Impedance
The gasoline fueled car uses Lucus 42.5 LB high Z fuel injectors (aka 009)
Coil Resistance: 15.9 Ohms / High Impedance
Thanks, great new feature |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
