| View previous topic :: View next topic |
| Author |
Message |
ausupra
Joined: 31 May 2009
Posts: 8
|
 Posted: Sun May 31, 2009 10:50 pm Post subject: Starting File - Toyota 2JZ GTE, m48 |
 |
|
hey
i've just got myself a m48 but am a bit stumped with some details. i've put it in the car and want to set it up now. but i'm a bit lost with details like degrees from TDC and these basic inputs. if anyone could give me a hand it would be great. i'm just trying to get all the data to put in up to the point of starting the car without some damage.
specs
toyota supra
2jz gte
m48
thanks for any input data you could help me with,
cheers
ausupra |
|
| Back to top |
|
 |
yssoof
Joined: 28 Jun 2009
Posts: 8
|
| Posted: Mon Jun 29, 2009 6:02 pm Post subject: |
|
|
crank index postion is 367
test advance 10
firing order 153624
parameter....
ref/sync mode:multi tooth
crank ref teeth:12
tooth ratio:42
ref sensor type:magnetic
ref sensor edge:fall
ref triger volt:0
sync sensor type:magnetic
sync sensor edge:fall
sync sensor volt:0
 |
|
| Back to top |
|
|
ausupra
Joined: 31 May 2009
Posts: 8
|
| Posted: Sat Jul 11, 2009 6:00 am Post subject: |
|
|
Thanks heaps for that, it is a real help and i appreciate it.
I'm also trying to get my VE table together, did you by any chance know the max torque and hp and at which rpms for the stock engine? or how i could find that out?
thanks again for any help! |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
