EFI University
Electronic Fuel Injection Tuning Forum
|
| View previous topic :: View next topic |
| Author |
Message |
APEX Speed Technology
Joined: 13 Nov 2004
Posts: 726
Location: Venice, CA
|
 Posted: Fri Jun 12, 2009 6:12 am Post subject: Cosworth EC-PRO plug & play for 2008-2009 Subaru STi! |
 |
|
Apex Speed Technology is proud to announce the Cosworth EC-PRO by Pectel for 2008+ Subaru WRX STi.
Built on championship-winning SQ-6 technology, this is one of the most comprehensive and powerful plug & play ECUs to ever hit the market. At $3500usd its an incredible value! Apex Speed Technology is among the most experienced Pectel dealers worldwide, and is the ideal source for this incredible ECU.
Features include:
Plugs directly into the stock harness with a base calibration to run the stock engine. Customers report a performance and drivability improvement just plugging it in!
Operates on the full factory CAN bus. Makes use of OEM dash and diff controller.
Knock monitoring uses OEM MIL lamp indication of Detonation levels (with user defined levels based on RPM and Boost)
Uses stock OEM “SI Drive” switch for selection of 3 alternate
calibrations (calibration selectable for boost, fuelling, ignition,
rev limit, ALS setting, VCAM target, Fly-By-Wire pedal
mapping, and overrun fuelling cut-off individually selectable for
Intelligent, Sports, and Sports-Sharp).
Pectel ALS (Anti lag system), with OEM switch used for ALS mode select
Variable CAM Pre-configured full quad camshaft support
56Mhz processor with FPGA for unmatched timing accuracy and control
Ethernet comms- fast & stable, can connect with multiple PCs or even do wireless tuning.
Comes with Pectel's new & powerful CalTool Windows-based tuning software
Powerful internal logging.
OEM Narrow band supported
0-5V External widebands supported
Internal wideband supported with NTK L1H1 & Cosworth harness kit.
External Comms support Optional Motorsport dash
Contact Apex Speed Technology today for more details!
_________________
Neel Vasavada
Apex Speed Technology
2947 S. Sepulveda Blvd
Los Angeles, CA 90064
310-314-2005
www.apexspeedtech.com |
|
| Back to top |
|
 |
APEX Speed Technology
Joined: 13 Nov 2004
Posts: 726
Location: Venice, CA
|
| Posted: Sun Jun 28, 2009 9:20 am Post subject: STI Plug & Play |
|
|
We just finsihed the last training and I've got to say this is the best plug & play I've ever used, period. They really put a lot of work into this product and the value is incredible.
We're so impressed, I'll demo it free to anyone in Southern California, or even anywhere we may be in the near future (New York, Northern California, Mid-Ohio...)
-Neel
_________________
Neel Vasavada
Apex Speed Technology
2947 S. Sepulveda Blvd
Los Angeles, CA 90064
310-314-2005
www.apexspeedtech.com |
|
| Back to top |
|
|
stevieturbo
Joined: 29 Aug 2006
Posts: 846
Location: Northern Ireland
|
| Posted: Fri Jul 02, 2010 9:57 am Post subject: |
|
|
Sounds Impressive.
Is this a US only product, or for all Euro/JDM models too ?
_________________
LS1, V7 YSi 
9.85 @ 144.75mph
202mph standing mile
http://www.youtube.com/watch?v=XgWRCDtiTQ0 |
|
| Back to top |
|
|
APEX Speed Technology
Joined: 13 Nov 2004
Posts: 726
Location: Venice, CA
|
| Posted: Fri Jul 02, 2010 11:58 am Post subject: EC-PRO |
|
|
Unfortunately its for US cars only right now. Its been a great product; fully integrated with the stock CAN stream and with all the power of a pro level ECU.
_________________
Neel Vasavada
Apex Speed Technology
2947 S. Sepulveda Blvd
Los Angeles, CA 90064
310-314-2005
www.apexspeedtech.com |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
©2007 EFI University |
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
