wout
Joined: 14 Nov 2005
Posts: 12
|
 Posted: Fri Jul 11, 2008 6:27 am Post subject: strange issue |
 |
|
I have a Motec m800 on a evo 7 with 6 speed gearbox .
I tune this car with a map and inlet temp.
i use the delco 300kpa map sensor .
What i get is when i drive in the first 5 gears i can go futher then 1.7 bar and even 2 bar boost .
But when i drive in the 6 gear i get errors in the ecu on the MAP and TP sensor when i go higher then 1.7 bar .Also the map sensor dont read higher then 1.7 bar so 270 kpa .
i have checkt the +5v to the map sensor and tps sensor and this is good .
i hope that someone can help me .
Wouter |
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
